Line interactive LCD UPS UPS status display Microprocessor control guarantees and high reliability Equipped with boost and buck AVR to stabilize input voltage Built-in DC start function enables UPS to be started up without AC power supplied Smart RS-232 communication port with free download software from the internet User's replaceable battery design Auto charge even though UPS is off Auto restart while AC recovery Provides modem/phone line surge protection Provides discharge, overcharge, and overload protection USB option phase single Capacity: VA/W 500VA/300W, 600VA/360W, and 800VA/480W Input: phase single Voltage: 110/120V AC or 220/230/240V AC Voltage range: 81 - 145V AC/162 - 290V AC ±5% Frequency: 50/60Hz (auto sensing) Frequency range: 45 - 55Hz/55 - 65Hz Output phase: single Voltage (battery mode): 110/120V AC or 220/230/240V AC Voltage regulation (battery mode): ±10% Frequency: 50Hz or 60Hz Frequency regulation (battery mode): ±1Hz Output waveform: modified sine wave Power factor: 0.6/0.6/0.6 PF Battery: Battery type and number: 12V/4.5Ah x 1pc, 12V/28W x 1pc, and 12V/34W x 1pc Backup time (at a PC load with 15-inch monitor) 10 minutes, 20 minutes, and 29 minutes Recharge time 8 hours to 90% after complete discharge transfer time: typical 2 - 6 minutes LCD indicator with blue/back light The LCD will self turn-on when the UPS is functioning including in, off, charging mode and fault mode Audible alarm: battery mode sounding every 10 seconds Low battery sounding every second Overload sounding every 0.5 second Battery replacement sounding every 2 seconds Fault continuously sounding Protection: Full protection: discharge, overcharge, and overload protection

Uninterruptible Power Supply Input voltage: 277 to 520V AC DC input: 240V DC Frequency: 50Hz, ±5% Output voltage: 220V AC ±3% Frequency: 50Hz, ±0.5% Wave form: pure sine wave 3 pieces in redundant parallel available Key features: High frequency and true double conversion online technology Fully digitized microprocessor control Wide input voltage range Zero transfer time LCD or LED display Cold start No add-on CNTL unit required for parallel connection, N+1 parallel redundancy Advanced battery management Automatic battery charge in UPS off mode Lightning and surge protection Short-circuit and overload protection Fan speed auto control when loads varies Optional extension battery pack EMI/RFI noise filter Smart RS-232 communication with monitoring software Optional SNMP card slot Low initial investment and flexible for future expansion Highest reliability and maximum performance for power sharing and redundancy Equipped with maintenance bypass switch Low initial investment and flexible for future expansion Highest reliability and maximum performance for power sharing and redundancy Application: Workstation Network server PCs and peripherals Small and medium-sized companies

High frequency and double-conversion online technology Fully digitalized microprocessor control Wide input voltage range Advanced PFC technology Self-testing when UPS starts up Advanced battery management Automatic battery charging in UPS-off mode Protection over short-circuit, overload, lightning, and surge Auto fan speed control for different loads Optional extension battery pack Battery voltage and load capacity display EMI/RFI noise filter Smart RS232 communication with monitoring software Optional SNMP card slot With LCD/LED display Dimensions: 192 x 460 x 348mm Weight: 13.5kg

Accurate pure sine wave output Strong capacity of various load Smart RS232 communication port (only for model B) Advanced performance due to CPU control Wide range of power input and accurate output AVR Perfect protection for overload, short circuit, over-voltage, low-voltage, and over-heating LED/LCD display (optional) Adapts to various of power net well, compatible with generator UPS start automatically when the main power recover (optional) Intelligent battery management

Features: Internal CPU control Advanced PWM technology for inverter output Low current switch control technology to extend the life of the switch Inner equipped charger of constant current and voltage, advanced battery management, and low voltage protection system Supports AVR function Inner installed examination circuit for too low or too high voltage Commercial power can connect with the power generator Thermal battery change technology, convenient for the users to change battery Special protection against AC/DC overload and short-circuit protection against inversion state with high reliability Short-circuit protection Over-charge and discharge protections With LED display Communication interface USB Input voltage: 85 to 135 or 165 to 275V AC Output voltage: 110 or 220V AC

With RJ45, RJ11, and USB port Internal CPU control Advanced PWM technology for inverter output Input voltage: 85 to 135V or 165 to 275V AC Output voltage: 110 or 220V AC more or less 5% Over-charge and discharge protection Low current switch control technology to extend the life of switch Inner equipped charger of constant current and voltage Advanced battery management Low voltage protection system AVR function, inner installed examination circuit for too low or high-voltage of commercial power Can connect with the power generator Thermal battery change technology Special protection against AC/DC over-load and short-circuit protection LED display

Maximum capacity: 500VA (300W) and 1,000VA (600W) Rated capacity: 600VA (360W) and 1,200VA (720W) Input commercial power range: 145 to 280V AC AVR range: 165 to 270V AC Frequency: 50Hz ±10% Output: commercial power sine-wave Inversion: simulated sine-wave Frequency commercial power supply: shared frequency with the commercial inversion State: 50Hz ±0.5 AVR voltage range: 220V AC ±10% (auto-sensing) Transfer time typical: 5ms (including detection time) Protection overload, UPS automatically shutdown if overload exceeds 150% of normal value for 30 seconds and 180% for 3 seconds Tel/fax/modem RJ45/11 jacks Short circuit UPS output is cut off immediately or input circuit breaker protection Alarm battery back-up beeping sound every 4 seconds when the input is cut off Battery low voltage beeping sound every one second when the input is cut off Overload continuously beeping sound when overload Battery type sealed, maintenance-free lead acid Capacity: (12V, 7Ah) x 1 (12V, 7Ah) x 2 Recharge time: 8 hours, 90% of full capacity Back-up time: typical 20 minimum (half load) Battery protection: automatic self-test, discharge protection Communication interface: RS232 (port) (B) bidirectional communication port Appearance: Net weight: 5.8 to 12kg Gross weight: 6.1 to 12.5kg Size: 260 x 97 x 135, 375 x 130 x 190mm Outside packing weight: 19 to 28.5kg Quantity: 32 Size: 455 x 366 x 228, 495 x 460 x 315mm Remark communication port (K-500VA/600VA/800VA/1,000VA/1,200VA) We accept order with special specifications

Line interactive LCD UPS UPS status display Microprocessor control guarantees and high reliability Equipped with boost and buck AVR to stabilize input voltage Built-in DC start function enables UPS to be started up without AC power supplied Smart RS-232 communication port with free download software from the internet User's replaceable battery design Auto charge even though UPS is off Auto restart while AC recovery Provides modem/phone line surge protection Provides discharge, overcharge, and overload protection USB option phase single Capacity: VA/W 500VA/300W, 600VA/360W, and 800VA/480W Input: phase single Voltage: 110/120V AC or 220/230/240V AC Voltage range: 81 - 145V AC/162 - 290V AC ±5% Frequency: 50Hz/60Hz (auto sensing) Frequency range: 45 - 55Hz/55 - 65Hz Output phase: single Voltage (battery mode): 110/120V AC or 220/230/240V AC Voltage regulation (battery mode): ±10% Frequency: 50Hz or 60Hz Frequency regulation (battery mode): ±1Hz Output waveform: modified sine wave Power factor: 0.6/0.6/0.6 PF Battery: Battery type and number: 12V/4.5Ah x 1pc, 12V/28W x 1pc, and 12V/34W x 1pc Backup time (at a PC load with 15-inch monitor) 10 minutes, 20 minutes, and 29 minutes Recharge time 8 hours to 90% after complete discharge transfer time: typical 2 - 6 minutes LCD indicator with blue/back light The LCD will self turn-on when the UPS is functioning including in, off, charging mode and fault mode Audible alarm: battery mode sounding every 10 seconds Low battery sounding every second Overload sounding every 0.5 second Battery replacement sounding every 2 seconds Fault continuously sounding Protection: Full protection: discharge, overcharge, and overload protection

CPU Type Socket 775 Fan Dimensions (mm) 90*90*25 Fan Speed (RPM) 2800 10% Fan Directions 4 Pin of the fan 4 PWN fuction NA Acoustical Noise (dBA) 27 Rated Voltage (VDC) 12 Rated Current (A) 0.41 Bearing Type 1Ball 1 sleeve Heat Sink Masterial Copper insert Heat Sink Dimensions (mm) 87*87*32mm Weight of cooler 460g

Specification: P5 775 and AMD AM2/754/939/940 Fan size: 90 x 90 x 25mm Maximum air speed: 61.5cfm Rated voltage: 12V DC Fan speed: 3,000 +/-10% rpm Noise: 30dB(A) Weight: 418g Sphere application: Up to Core 2 DUO Up to Celeron Up to Pentium 4 Up to Pentium D Up to Sempron Up to Athlon 64 Uo to Athlon x 2 Up to Phenom 64

Specifications: Fan size: 9025 round fan Maximum air input: 49.5cfm Rated voltage: 12V DC Rated speed: 2,800rpm +/-10% Noise: 31dB(A) Sphere of application: All of LGA775 Intel PentiumD/Celeron-D series All of Intel Core 2 duo All of Core 2 Quad

Fan size: 9025 round fan Max air speed: 52CFM Rated voltage: 12V DC Fan speed: 3,000+/-10%R.P.M Noise: 32dB(A) Sphere application: Up to pentium D 775 820 Up to pentium 4 775 653 Up to pentium 4 775 550 All Intel Celeron LGA775 all series Intel Core 2 duo and core 2 Quad LGA 775

Specification: P5 775 Fan size: 90 x 90 x 32 round fan Max. air speed: 42cfm Rated voltage: 12V DC Fan speed: 2800 +/-10% rpm Noise: 28dB(a) Sphere application: Up to Pentium D 775 820 Up to Pentium 4 775 653 Up to Pentium 4 775 550 Up to Celeron D 775 all series

Fan size: 92 x 92 x 25mm round fan Maximum air speed: 47CFM Rated voltage: 12V DC Fan speed: 3000+/-10% RPM Noise: 32dB(A) LGA775CPU P4 Prescott LGA 775 3.8GHz All of Celeron D LGA 775

Outline dimensions: 98 x 98 x 58mm Fan dimensions: 92 x 92 x 25mm Bearing type: one ball Rated speed: 2,500rpm ±10% Voltage: 12V DC Intel P4 LGA775 Prescott 3.6GHz All serial Intel LGA775 (Celeron-D) All serial Intel Core 2 Duo Low noise Yellow fan blades

Socket type 754, 939, 940, AM2, F AMD CPU clock speed (maximum): Sempron? (up to 89W): Socket 754 (3400+, 2.0GHz) Socket AM2 (3800+, 2.2GHz) Athlon? 64 (up to 89W): Socket 754 (3700+, 2.4 GHz) Socket 939 (4000+, 2.4 GHz) Socket AM2(4000+, 2.6 GHz) Athlon? 64 FX (up to 89W): Socket 939 (FX-53, 2.4GHz) Socket 940 (FX-53, 2.4GHz) Athlon? 64 x2 dual-core (up to 89W): Socket 939 (4400+, 2.2 GHz) Socket AM2 (5600+, 2.8GHz) Phenom? x2 quad-core (up to 89W): socket AM2 (9100e, 3.2GHz) Opteron? (up to 89W): Socket 939 (150, 2.4 GHz) Socket 940(150, 2.4GHz; 250, 2.4GHz; 850, 2.4GHz) Dual-core Opteron?(up to 89W) socket 940 (275HE, 2.2GHz; 875HE, 2.2GHz) Second-generation opteron? (up to 89W) Socket AM2 (1218HE, 2.6GHz) Socket F (8218HE, 2.6GHz; 2218HE, 2.6GHz) Third-generation Opteron?(up to 89W): socket F (8356, 2.3GHz; 2356, 2.3GHz) Cooler dimension: 77 x 83.5 x 71mm Cooler weight: 371g Fan: Bearing type 1B1S/entering bearing Rated voltage: 12V DC Dimension: 80 x 80 x 25mm Speed: 2000rpm (+/- 10%) Airflow: 26.0cfm (+/- 10%) Noise: 20dBA Interface material high efficiency thermal compound

Designed for all gaming and PC enthusiasts Lightweight CPU coolers with low noise, high performance and easy attaching clip Designed for Intel LGA 1156 processors Four models available: 1050 Light/1050 Light(E) 1050 Light(2B) 1050/1050(E)/1050(2B) 1050 PWM/1050 PWM(E)/1050 PWM(2B)

H.S material: AL6063T5 Out line dimensions: 80 x 80 x 52mm Fan dimensions: 80 x 80 x 25mm Bearing type: sleeve-bearing Weight: 215±10g Rated speed: 2500±15%RPM Voltage: DC 12V Intel P4 LGA775 Prescott 3.0GHz Intel Core 2 Duo LGA775 E6700

Dimensions: 93 x 102 x 135mm Weight: 485g Fan dimension: 92 x 92 x 25mm Fan speed: 1,600rpm Airflow: 35.8cfm Noise: 19dBA CPU support, Intel All celeron Pentium D 3.4GHz (95W) Prescott: 3.4GHz (84W) Intel Core 2 Duo E6700: 2.66GHz (65W) Intel Core 2 Duo E6800: 2.93GHz (75W) Intel Core 2 Duo QX6800: (130W)

Key specifications: HS material: AL6063T5 Out line dimensions: 98 x 98 x 68mm Fan dimensions: 92 x 92 x 25mm Bearing type: one ball Rated speed: 2,500rpm ±10% Voltage: 12V DC Recommendation: Intel P4 LGA775 Prescott 3.2GHz