Fabric: pearlized PVC In curved shape Attached hood with elastic band Snaps closure

Material: PVC with smooth finish Different designs available

Material: PVC with smooth finish Different designs available

Fabric: polyester with PVC coating Sewing finishes Attached hood with elastic band and two slash pockets Yellow decorated webbing along hood, sleeves and legs Reflective tapes on pants for safety Multi-color silk screening is offered

Children's PU rainsuit with bib Pants Material: high-quality PU/polyester fabric Detachable hood Snaps closure One elastic band on each side of bottom With bib pants Reflective tapes for safety OEM design accepted

Material: Polyester Taffeta Detachable hood and snaps closure An extra snap band on the back can be opened to hold school bag Photo printing can be made on the raincoat

The product is a hand emergency charger which can take great advantage in the outdoor without power source or in the place earthquake has taken place. Specialty 1. It needs no power source. Just rotate the handle. And it will act as an emergency charger for mobile phone. 2. Charge for 3 minutes, get 2-8 minutes communication by telephone. 3. Don’t worry about emergency power shut-off. 4. Set LED inside, so it can be used as an emergency light. 5. Subminiature and be easy to carry about. 6. Sate design. Instruction 1.As charge mobile phone. A.Insert the enclosed interface into the charge connector. B.Insert the other plug into the socket of the product. C.Twist the handle and rotate it clockwise at the speed of 2.5 circles per second to charge for 3 minutes and it will get 2-8 minutes communication by telephone. The product will be heated for a long time charge. As to avoid any accident. Please stop charging as it was heated. Fast rotation cannot increase the capacity of generation capacity. On the contrary, it will cause an accident. So, don’t rotate the handle too fast. 2.As use it as an emergency light. A.Don’t insert the plug into the socket of the product. B.Twist the handle, and rotate it clockwise at the speed of 1.5 circles per second. The led will light. As use it for along time. The product will be heated. This will cause and accident. So try to use it for a short time. Please don’t rotate it too fast. Notes 1. As rotate the handle, be careful not to hurt your hand or nail. 2. If the product is heated, please stop using it at once. And reuse it as the temperature descends. 3. Don’t remold/reform the product personally. 4. When using it. If it sends our different noise, smoking, or the battery case of the mobile phone is heated, please stop using it at once. 5. Don’t put the product in the place with high temperature and heavy dampness. 6. The product just applies to the specified mobile phone. 7. The product doesn’t apply to colma, one, phs, etc. 8. The product cannot charge the phone battery fully. 9. As connect the phone with the interface, please notice the shape and direction of the interface. 10.If the phone battery has no power at all. It will be very different to charge. So try to charge before the phone battery sends out a warning of no power. Certificate Standard：ROHS CE

USB data cable for PSP3000 Can wear different jackets, stylish With an extra strap Mini, but functional, can charge the console and do data transferring USB compatible, more convenient

In curved shape Attached hood with elastic band Velcro closure on neck Packs into a pocket pouch at back Sewing finish Graphics can be printed

Material: heavy-duty PVC Waterproof with heat-welding finish Eyelets under armpits for ventilation An extra rain cover attached to the back with snap closure, especially designed for school bag Photo printing can be made on the raincoat

For children: 6 months to 4 years old Shell: 100% clear PVC (0.15mm), pass En71 (phthalate free) Lining: polar fleece with glitter on the surface Attached hood with elastic, half placket with plastic snap, snap closure at both sides

Attached hood with 3/4-inch elastic band at front hood center edge Three pieces heart shaped patch at the front packet with 3/4-inch width velcro Two square pocket at front lower body Sea-maiden print on the front upper right and back Pentacle imprint at pocket and cuff Shell: 100% PVC with golden power 0.28mm Size: 3/4, 5/6, 7/8 Packing detail: 25 pieces/carton Net weight: 22.5kg, gross weight: 24.5kg Carton measurement: 18 x 12.5 x 8 inches Packing method: each with plastic hanger in PP polybag with suitable quantity per export carton

Size: 12/18m, 24/36m, 4 to 5Y Shell: 100% PVC 0.20mm Bear shaped hood Four pieces plastic button at the front packet Contrast patch pocket Customized designs are accepted

For children: 2 to 8 years old Fabric: 100% pearl PVC (0.20mm), pass En 71 (Phthalate free) Attached hood with elastic band, decorate trim at hem and cuff Heart-shape badge at front placket and left chest, with glitter beads inside Glitter printing allover

Dog Raincoat Size: 8 to 24 inches Color: green or other colors

Suitable for dog Size: 8 to 24-inch Various colors and designs are available

Three fold natural straw beach mat, measures 36" x 72". Three fold natural straw beach mat, measures 36" x 72". Printed fabric panel showcases your logo. Color: Black, Pink Size: 36" x 72"

Suitable for dog Available in yellow Size: 8 to 24-inch

Fashionable design Good quality

125cm long industrial raincoat 100% water-resistant Attached hood and snap front with storm flap 0.28 to 0.35mm thickness PVC, poly material